Varzene

CAST IRON (DUCTILE IRON - NODULAR GRAPHITE)

  • EN-GJS-400-15C (EN 164822014)

    EN-GJS-400-15C (EN 164822014)

    TASSO Grade EN-GJL-150C (According to EN 16482:2014) This grade offers exceptional machinability and excellent surface finishes, but limited strength and wear resistance. Noise and vibration damping are excellent in this grade.
    Main Elements: Iron, Carbon, Silicon, Manganese, Phosphorous, Sulphur, Others/Alloying
    Denstiy: 7,25 gr/cm3
    EN-GJS-400-15C (EN 164822014) Data Sheet / Specifications 1688 5
  • EN-GJS-450-10C    ( EN 16482 2014)

    EN-GJS-450-10C ( EN 16482 2014)

    TASSO Grade EN-GJS-450-10C (According to EN 16482:2014) This grade has high wear resistance, strength and heat treatment response. It possesses good machinability and excellent surface finish. Noise and vibration damping are good in this grade.
    Main Elements: Iron, Carbon, Silicon, Manganese, Phosphorous, Sulphur, Others/Alloying
    Denstiy: 7,25 gr/cm3
    EN-GJS-450-10C ( EN 16482 2014) Data Sheet / Specifications 1673 5
  • EN-GJS-500-14C (EN 1648  2014)

    EN-GJS-500-14C (EN 1648 2014)

    TASSO Grade EN-GJS-500-14C (According to EN 16482:2014) This solution strengthened grade has superior machinability as well as physical properties compared to traditional GJS-500, combined with good impact, fatigue, electrical conductivity and magnetic permeability. Noise and vibration damping are good in this grade.
    Main Elements: Iron, Carbon, Silicon, Manganese, Phosphorous, Sulphur, Others/Alloying
    Denstiy: 7,25 gr/cm3
    EN-GJS-500-14C (EN 1648 2014) Data Sheet / Specifications 1437 5
  • EN-GJS-600-3C (EN 16482 2014)

    EN-GJS-600-3C (EN 16482 2014)

    TASSO Grade EN-GJS-600-3C (According to EN 16482:2014) This grade offers reasonable machinability and excellent surface finish. It has high wear resistance, strength and heat treatment response.
    Main Elements: Iron, Carbon, Silicon, Manganese, Phosphorous, Sulphur, Others/Alloying
    Denstiy: 7,25 gr/cm3
    EN-GJS-600-3C (EN 16482 2014) Data Sheet / Specifications 1712 5
  • EN-GJS-700-2C (EN 16482 2014)

    EN-GJS-700-2C (EN 16482 2014)

    TASSO Grade EN-GJS-700-2C (According to EN 16482:2014) This grade offers high wear resistance, strength and heat treatment response. It has reasonable machinability and excellent surface finish. Noise and vibration damping are good in this grade.
    Main Elements: Iron, Carbon, Silicon, Manganese, Phosphorous, Sulphur, Others/Alloying
    Denstiy: 7,25 gr/cm3
    EN-GJS-700-2C (EN 16482 2014) Data Sheet / Specifications 1654 5